Q&A: Chicago Manufacturer Tells How New Machine Has Them Gearing Up Much Quicker
Avers Machine partnered with Helios Gear Products to install a new, automation-equipped CNC gear hobber at its full-service machine shop in Schiller Park, Illinois. Recently, Chris Wellman and Ivan Torres from Avers Machine sat down to discuss how their workflow has changed dramatically since the installation.
Helios Gear Products specializes in the parallel axis gear industry, offering machines, consumable tools, and automation systems for gear hobbing, worm and thread milling, shaping, power skiving, and deburring and chamfering.
VIDEO: Gear Manufacturing Game-Changer | Avers Machine
Helios recently installed a new gear hobber at Avers Machine's Chicago facility where two of the company's leaders, Chris Wellman and Ivan Torres, talked about the improvements the machine has brought to their operation.
Q: Who are your typical customers?
A: Chris We like to focus on niche business. Most of our niche customers are going to be OEM (original equipment manufacturers), and we're making a specialized component that goes into their assembly or into their machine to be used in whatever industry that they happen to be in. We're a rack manufacturer, we're a gear manufacturer. We're a machining company and we've become a little bit more of a one stop shop for our customers over the years.
Q: How did you first get connected with Helios and what is the relationship today?
A: Chris We were always good friends with the people at Koepfer America [former name of Helios Gear Products], and we always knew their products and had their equipment and machines. When I moved over to Avers, we didn't have any Koepfer machines or equipment, so we started a conversation with them. And it was probably about two years later that we bought our first Helios machine. We knew that they knew gearing, and they knew hobs, and they knew processes, and how to make everything, so it was a good relationship and a good partnership to strike up with them, to basically bring us into the newest, most updated technology and processes, and cutting feeds and speeds.
Q: What was the Hera 90 installation process like? How long did it take to start cutting gears and what has the technical support been like?
A: Chris The machine came in and we powered it up the next day. Then Helios was in the following day to start training and installation. From the time that the machine hit our floor we ran our first part three days later. We joke about it a little bit like, wow you can call Helios and ask them any question and they'll stop what they're doing and they'll help you.
A: Ivan We text Edgar with questions and he responds right away with answers. We really appreciate that, and it has been a selling point. They're very responsive and that's important to us. Not everyone else is the same.
Q: What types of parts are you making on the Hera? How has the machine been working for you?
A: Ivan The machine has made us so much more productive. There are jobs that used to take a week, and now we are knocking them out in two days or less. It's been a game-changer for us. We've done spurs, helicals, worm gears, and now we're doing worms, so basically everything it's made to do, we've run through it. We had a recent worm gear job that we knocked out in about a week and a half, and it was probably a 1000-piece run and that stuff was super hard. Previously it would have taken us over a month. So again, it's been a game changer. Everything that we've thrown at it, it's been able to do.
A: Chris We ran seven jobs back to back on the same arbor and all we had to do was go up to the control and change the number of teeth; we never had to change the work arbor, never had to change the hob, and because of the CNC control and the accuracy of the machine, we just put in exactly what size we wanted, and we ran seven jobs and cut them all in a matter of hours. With the accuracy of the machine, we were able to check them immediately in our CNC gear checker and everything was spot on, right where it needed to be.
Q: What are your top three favorite benefits of the machine and what changes has it brought about?
A: Chris Our top three are the capability of the machine, the repeatability of the machine, and the accuracy of the machine. With the Hera, we've been able to save so much time because the machine automatically goes back to the settings where we were successful. We're using the same hob, the same tooling, and our setup times have been significantly cut. We also appreciate the rigidity of the machine. On tough-to-cut parts, we used to run a few hundred parts and the hob would be done; we would have to take it out, sharpen it, and recoat it. With the Hera we're cutting over 1000 parts because it's just that much more of a rock solid, rigid machine.
Q: What are cycle times now looking like with the Hera?
A: Chris In the Hera, we've got 6000 RPMs, so we're not limited at all and it really becomes a limitation of how fast the tool can run. We were running a high-speed steel hob that was coated so we were able to ramp that up to 1000 RPM without a problem. We even now have the ability to utilize carbide hobs which we have done on some jobs, and we can take that 1000 RPM up to 2000 or 3000 RPMs. So, our cutting cycle time improved dramatically, 2x to 3x faster. But even more importantly, there's a deburring disk in the Hera 90. The deburring disk comes up and deburrs each part so all we need to do is just a very light brush when the part comes out of the machine, which saves a tremendous amount of deburring and handling time. So, it's not just a cycle time and accuracy improvement, it's also a handling and deburring improvement.
Q: How has your manufacturing process changed since you added the Hera 90?
A: Chris Before the Hera 90 we would run higher volume jobs on more manual equipment, putting a lot of strain and load on the operators; you may have a short cycle of 3-4 minutes, and then you need to spend 2 minutes changing the part. The Hera 90 brought us automation. Since we were able to make the tooling in-house with our own machine shop, we were up and running immediately. The machine is loading and unloading faster than any operator could do manually, and it takes all that load off of the operators, so that was really good to see. We've improved our efficiency, we've improved our quality, and we're cutting parts faster. Everything from that standpoint worked out really well and was a no-brainer.
Q: How is the Hera helping you prepare for the future?
A: Chris The Hera 90 platform allows us to do a couple of different things. It allows us to use our creativity and think outside the box when it comes to making new tooling, and re-engineer jobs so they can be so much smoother to set up and so much easier on our operators. The main focus is the accuracy and efficiency of the machine, and we've been able to save a lot of floorspace, and floorspace at our company is very important nowadays as we're jam-packed with equipment. What we're doing now is taking an old machine out and putting a new machine in. If we can take an old machine out, in particular two or more machines, and I can put a new machine in that has less floor space and can outperform them from an accuracy and efficiency standpoint, that's a no-brainer and we're doing that every time.
Want more information? Click below.
Rate this article
View our terms of use and privacy policy ::m::